|
Model:GF-L65ES, GF-H75ES, GF-H85ES, GF-L85ES, GF-L100ES, GF-L120ES, GF-L150ES, GF-L180ES
SPECIFICATION :
| |
MODEL |
GF-L55ES |
GF-L65ES |
GF-L85ES |
| FEATURE |
MATERIAL TO BE USED |
LD/LLDPE ( Low & Linear Low Density Polyethlene ) |
| MAX. FILM WIDTH |
1150mm |
1550mm |
2200mm |
| FILM THICKNESS |
Standard 0.015 - 0.2 mm, possible to produce thicker gauge |
| MAX. EXTRUSION OUTPUT |
120 KG/HR |
180 KG/HR |
240 KG/HR |
| EXTRUDER |
SCREW DIAMETER |
55 mm |
65 mm |
85 mm |
| SCREW L/D RATIO |
30 : 1 |
| DRIVIVING MOTOR |
50 HP |
75 HP |
100 HP |
| BLOWN FILM DIES |
250 mm |
350 mm |
500 mm |
CONTROL
PANEL |
TYPE |
INDEPENDENT TYPE SWITCH BOARD |
| TEMPERATURE CONTROL |
6 ZONES |
7 ZONES |
8 ZONES |
COOLING
UNIT |
TYPE |
EXTERNAL AIR COOLING BY DUALLIP AIR RING |
| AIR BLOWER |
5 HP |
7.5 HP |
10 HP |
TAKE-UP
UNIT |
TYPE |
TOWER FIXED TYPE |
| ROLLER WIDTH |
1200 mm |
1600 mm |
2300 mm |
| TAKE-UP SPEED |
Max. 60 M/Min |
| BUBBLE GUIDE |
1 SET, CAGE TYPE WITH WOOD or UPE RINGS |
| STEADY PLATE |
1 SET, MADE OF ALUMINUM ROLLERS |
| GUIDE UNIT |
1 SET, DRIVEN BY TORQUE MOTOR |
WINDING
UNIT |
TYPE |
SINGLE STATION, SURFACE FRICTION TYPE |
| FILM CUTTING |
BY RODLESS AIR CYLINDER KNIFE |
| BOBBIN CHANGE |
SEMI-AUTO TYPE, BY PNEUMATIC SYSTEM |
| EGGECTIVE WIDTH |
1150 mm |
1550 mm |
2300 mm |
| WOUND-UP DIAMETER |
MAX. 1000 mm |
| WINDING MOTOR |
2 HP |
2 HP |
3 HP |
| OPTIONS |
AUTO LOADER, PRESSURE GAUGE, DIE ROTATING UNIT, AIR CHILLER,
WIDHT CONTROL, CORNA TREATER, SATURN AIRRING(www.saturn2.com)
VERTICAL TYPE or HORIZANTAL TYPE OSCILLATING TAKE-UP UNIT, FULL GUSSET,
EDGE POSITION CONTROL(EPC), EDGE-TRIM RECYCLING UNIT, TENSION CONTROL,
DOUBLE STATION WINDER, HYDRAULIC UNLOADING SYSTEM...Etc. |
Specifications of the machine could be changed according to your requirements.
|
